power requirement power input dc 10 ~ 30v input (w/ 3-pin terminal block) power consumption 60w (max.) storage type 1 x 2.5 " drive bay for sata interface hdd/ssd supporting 300mb/s hdd transfer rate 1 x cfast socket mechanical construction aluminum alloy mounting wall-mount/din rail mounting weight max. 2.92 kg (6.42 lb) dimensions (w x d x h) epc-2020: 164 x 192 x 120 mm (6.46 x 7.56 x 4.72 ) epc-2030: 164 x 192 x 140 mm (6.46 " x 7.56 " x 5.51 " ) ordering information epc-2020 EPC-2000 with 1 x pcie slot & 1 x pci slot epc-2030 EPC-2000 with 2 x pcie slot & 1 x pci slot EPC-2000 series embedded programmable controller with intel? atom? d525 platform ? fanless, cable-less and modularized design ? wide range dc power input (10 ~ 30v) ? rich onboard i/o and expansion slots (max. 2 x pciex1 slots, 1 x pci slot) ? rs-485 auto-fow control supported ? easy installation/maintenance ? intel? 2.5" sataii ssd compatible system cpu soldered onboard intel ? atom? d525 processor memory soldered onboard ddr3 2gb sdram chipset intel ? ich8m graphics integrated with intel ? gma 3150 lan chipset 2 x intel ? 82574l pcie controllers watchdog timer 1~255 level reset peripherals and devices serial port 4 x com ports with db-9 male connectors (com1, com2: rs-232, com3, com4: rs-232/422/485 selectable) usb port 4 x usb type a connectors for usb 2.0 ports lan 2 x rj-45 gigabit ethernet ports video port 1 x db-15 female connector for analog rgb 1 x db-26 male connector for dual channel 24-bit lvds port audio mic-in/line-out with realtek alc886 hd audio codec kb/ms ps/2 interface keyboard/ mouse via y-cable expansion bus max. 2 x pciex1 slots 1 x pci slot environmental operating temp. -20 ~ 60c (-4 ~ 140of), ambient with air fow storage temp. -40 ~ 85c (-40 ~ 185f) relative humidity 10 ~ 95% @ 40c (non-condensing) vibration 3g rms /5 to 500hz/random operation, with ssd shock & crash operating 20g (11ms), non-operating 40g with hdd operating 40g (11ms), non-operating 60g with cfast/ ssd crash 80g (11ms) qualifcation certifcation ce, fcc epc-2020 epc-2030 ? fanless, cable-less design features all specifcations are subject to change without notice.
all specifcations are subject to change without notice. dimensions EPC-2000 series 164.00 192.00 190.00 180.00 100.00 80.00 6.50 #6-32 nut (x4) unit: mm (a) dimensions model (a) 120mm 140mm epc-2020 epc-2030 ? fast , tool-free installation cfast & hdd thumbscrew design for easy, tool-free installation easily remove top cover by hand 2.5" hard disk drive cfast card installation
all specifcations are subject to change without notice. optional accessories pac-p065w 65w ac/dc adapter kit power input 100 ~ 240 vac power output 19vdc, 3.4a, 65w ssd-25080 intel? 2.5" 80gb sataii ssd kit brand/type intel / 2.5 inch interface sataii capacity 80gb dimensions (w x d x h) 100.45 x 69.85 x 9.5 mm (3.95" x 2.75" x 0.37") wmk-2000 wall-mount kit for EPC-2000 series material spcc+ni dimensions (w x d x h) 120 x 4.2 x 190 mm (4.72" x 0.17" x 7.48") drk-2000 din rail mounting kit for EPC-2000 series material spcc+ni, al6063 display compatibility din rail 35 mm optional i/o expansion dio-16/16l(pci)h 16-ch input / 16-ch output isolated digital i/o board for pci digital input 16 ch (opto-isolation) digital output 16 ch (opto-isolation) interface pci dio-32/32l(pci)h 32-ch input / 32-ch output isolated digital i/o board for pci digital input 32 ch (opto-isolation) digital output 32 ch (opto-isolation) interface pci comm-2pd(pci)h 2-ch isolated rs-422a/485 communication i/o board with isolation for pci serial port 2 x isolated rs-422a/485 serial ports interface pci tml-96 96-pin din rail mountable screw terminal tml-37 37-pin din rail mountable screw terminal cbl-96-1.5p 1.5m length shielding cable with 96-pin half-pitch connector at each end cbl-37-1.5p 1.5m length shielding cable with 37-pin d- type (m) connector at each end
|